图片无法正常显示？请点击在浏览器中 查看

自上期公布第一批获小米手环的预登记观众以后，反响热烈。第二批抽奖活动也已全面启动，获奖名单将在8月如期公布，千万不要错过！

随着展会日期的推进，inter airport China 2018 98%的展位已售罄，展会上可能有您想了解的产品技术，可能有您想听取的论坛会议，可能有您想见到的行业专家……不论什么，都有吸引您的地方。建议您立即预登记，省心省力，所有预登记观众，可在现场注册台的预登记观众专用通道领取精美礼品“二合一数据线”一份！
 
Since the first list of the pre-registered lucky draw winners who won smart band was announced, we have received enthusiastic response. Now the second round of the lucky draw has been fully launched and the second list of the pre-registered lucky draw winners will be announced in August as planned. Please don't miss it!

As time goes by, 98% of the booth in inter airport China 2019 has been sold out. In the exhibition, there might be the product technique that you want to know about, the forum and meeting that you want to attend, the industry experts that you want to meet and so on. No matter what, there must be something attractive for you. We suggest you pre-register right now, making it convenient to participate in the exhibition. Each pre-registered audience will collect one elaborate gift— two in one data line in the dedicated channel for pre-registered audiences at the registration desk.
展商介绍：
读取速率跃升到99%以上，Datalogic得利捷机场行李处理系统解决方案
随着人民生活水平的提高，越来越多的人出行选择坐飞机。坐飞机人数的增多使得航空公司需要扫描检查的行李越来越多。据相关数据统计，全球各地的航空公司每年大约需要扫描检查的行李高达45亿件。
为了提高行李处理效率和准确性，国际航空运输协会（IATA）发布第753号决议，该决议就机场行李托运系统方面，制定了新的跨行业跟踪规则，并且已经于2018年6月生效。据了解，此次决议要求航空公司在每个中转点及装卸点跟踪行李运输过程，以减少行李丢失和错拿的情况，也就是说全世界所有的机场要在抓紧实施新的机场行李处理系统。  
作为机场行李处理系统（BHS）解决方案领导品牌，Datalogic得利捷拥有一系列尖端技术，已服务于全球超过200个机场（包括东京、迪拜、香港、悉尼、巴黎、伦敦、吉隆坡、芝加哥和亚特兰大），并且从中积累了大量的经验，已做好充分准备，帮助机场提供一系列的行李处理系统解决方案。
Datalogic得利捷的产品易于应用，可以更加方便的深度定制不同方案，来满足客户的多种需求。就机场行李处理系统解决方案方面，Datalogic得利捷的机场专家可根据机场方面的扫描要求提供定制解决方案，比如全激光方案，全影像方案以及与RFID结合的方案。
不论是全激光方案，全影像方案还是与RFID结合的方案，Datalogic得利捷都有非常成熟的行李处理系统解决方案及应用案例，而且每一种方案都有自己独特的性能优势：
1、激光方案：采用Datalogic得利捷最新激光条码阅读器DX8210和DS8110，配合SC5000控制器。该读码器具有超大景深，调试简单，运行稳定，无需机械变焦等优点。
2、影像方案：采用Datalogic得利捷全新的Matrix 450N产品，该产品具有超大景深，调试简单，运行稳定，支持图片输出，对破损、打印质量低的条码阅读效果好等优点。
3、与RFID结合的方案：RFID产品采用双天线设计，只需要顶面及底面两个天线，安装简单，阅读性能高。最重要的是因为该方案自身能很好的抑制外界的干扰，所以无需做屏蔽罩。相比竞争对手的方案，该方案少了繁琐的屏蔽罩，减少了安装工作量，同时降低了客户的硬件成本。当前机场的行李标签受打印质量、污损、褶皱等影响，实际的读取率只能到95%左右，RFID的引入完全解决了这个问题，其读取行李信息不再受以上因素的影响，且读取设备不需要校准以及维护，实际读取率可以达到99%以上，大大提高了行李处理效率。
总的来说，Datalogic得利捷行李处理系统解决方案的运用必将有效提高机场行李分拣效率，帮助合作伙伴最大限度的减少了行李损失，并提升乘客的满意度。就目前来说，Datalogic得利捷的行李处理系统解决方案已凭借数据采集设备读取扫描效率高以及调试简单等优点，赢得了合作伙伴的一致好评，相信未来它还将被运用到更多的航空公司，用于机场行李处理。

Read rate jumps rises over 99%, Datalogic’s baggage handling system solution
With the improvement of people's living standards, more and more people choose to fly by plane. The increase in the number of people flying has caused more luggages to be scanned and checked by airlines. According to relevant statistics, airlines around the world need to scan and inspect up to 4.5 billion pieces of luggage each year.
In order to improve the efficiency and accuracy of baggage handling, the International Air Transport Association (IATA) issued Resolution 753, which sets new cross-industry tracking rules for airport baggage handling systems and has entered into force in June 2018. It is understood that the resolution requires airlines to track the baggage transportation process at each transfer point and loading and unloading point to reduce baggage loss and mishandling, which means that all airports around the world are trying to implement the new airport baggage handling system.
As the leading brand of airport baggage handling system (BHS) solutions, Datalogic has a range of cutting-edge technologies that serve more than 200 airports worldwide (including Tokyo, Dubai, Hong Kong, Sydney, Paris, London, Kuala Lumpur, Chicago and Atlanta. ), and accumulated a lot of experience, also has fully prepared to help the airport provide a range of baggage handling system solutions.
Datalogic's products are easy to apply, and more convenient to customize different solutions to meet the various needs of customers. In terms of airport baggage handling system solutions, Datalogic's airport experts can provide customized solutions based on airport scanning requirements, such as full laser solutions, full imaging solutions and RFID-integrated solutions.
Whether it's the full laser solution, the full-image solution or the combination of RFID, Datalogic has a very mature baggage handling system solution and application case, and each solution has its own unique performance advantages.
1. Laser solution: Using Datalogic's latest laser bar code readers DX8210 and DS8110, with SC5000 controller. The code reader has a large depth of field, simple debugging, stable operation, and no mechanical zoom.
2. Image scheme: Datalogic's new Matrix 450N product is adopted. This product has large depth of field, simple debugging, stable operation, support for picture output, and good reading of broken and low print quality barcodes.
3. The solution combined with RFID: The RFID product adopts dual antenna design, only needs two antennas on the top and the bottom surface. The installation is simple and high reading performance. The most important thing is that the scheme itself can suppress external interference very well, so there is no need to make a shield. Compared with the competitor’s, this solution has fewer complicated shields, which reduces the installation workload and reduces the hardware cost of the customer. At present, the baggage tag of the airport is affected by print quality, defacement, wrinkles, etc. The actual reading rate can only reach about 95%. The introduction of RFID completely solves this problem, and the baggage information is no longer affected by the above factors. Moreover, the reading device does not need calibration and maintenance, and the actual reading rate can reach more than 99%, which greatly improves the baggage handling efficiency.
 
In general, the use of Datalogic's baggage handling system solutions will effectively improve airport baggage sorting efficiency which can help partners minimize baggage loss and increase passenger satisfaction. For now, Datalogic's baggage handling system solution has won the praise of its partners for its high scanning efficiency and simple debugging. It is believed that it will be applied to more airlines' airport baggage handling systems in the future.
武汉远大电气制造有限公司，在武汉，黄陂区临空产业园的生产基地，投资3000万元购入国际上先进自动化生产线，日产一万套以上，产品质量超越国家标准。在上海，国家现代服务产业基地的研发测试中心，所开发的“智慧消防”产品，集中电源集中控制型/集中控制型消防应急照明和疏散指示系统系列产品先后获得检验报告和强制性3C证书，此外还有灯具结构专利、计算机软件著作权登记证书及专利等几十项专利证书。开发的 “天安云”可接入烟感、疏散、定位等诸多消防系统，实现智慧消防从初期预警到疏散逃生和定位搜救的智慧管理平台系统一体化。该系统可与政府消防平台、 物管中心以及手机APP终端连接。

Wuhan YuanDa Electrical Manufacturing Co., Ltd. is located in PanLongCheng Economic Development Zone in Wuhan. It is one of the largest industrial electrical and fire emergency electrical production enterprises in Hubei Province. In the fierce market competition, YuanDa people are not afraid of strong players and strive to do the best to make YuanDa develop further."Yuanda" has won the unanimous approval of consumers in terms of quality, quantity, reputation, and after-sales service. Our company has more than 150 staff, including 10 senior or intermediate engineers and 32 technical personnel. It covers an area of 122 acres with 24000 square meters of modern standard factory buildings. We have got ISO9001: 2000 Quality Management System (QMS) Certification, ISO14001 QMS Environmental Management System (EMS) Certification and OHSAS18001 Occupational Health and Safety Management System Certificate. We also have passed the national mandatory "CCC" certification. Our products have been used in many large projects and they have been exported to Thailand, Cambodia and African countries. Besides, our products have earned high reputation among customers.
公司主要致力于中国境内机场区域地面服务设备的整车销售及服务、设备零备件的销售及服务、车辆整车的维护保养、修理及大修等主要业务。公司经营的地面服务设备包括柴油飞机牵引车、电瓶环保飞机牵引车、航空食品车、飞机除冰车、电源设备以及地面APU气源等设备。至今，我公司销售的产品遍布中国各大航空公司和各地方机场。产品使用广泛，在各机场运营中起到关键的作用。北京贝亦德技术开发有限公司自1999年起致力于地面服务设备的市场开发、销售及服务，保障了设备用户的正常运作。

BEDE Tech. Development CO.Beijing located at A2, Pufang Road, Fengtai District,Beijing,P.R.China. The company is focusing on the sales and services of airport ground support equipment and spare parts, as well as vehicle maintenance, repair and overhaul within China. The company specializes in GSE including diesel aircraft tractor, electric aircraft tug ,air catering hi-loader aircraft,deicing vehicles, ground power unit, APU air start unit etc.
So far, our products have spread over major airlines and local airports in China. Our products are widely used and play a key role in major airports’ operation.
Since 1999, BEDE Tech. Development CO.Beijing has engaged in the market development, sales and services of ground service equipment. Guarantee the GSE normal operation of the users.
康耐视机场行李处理解决方案-----提高您的运营速度和可靠性
康耐视机场处理解决方案可提高行李处理的速度和准确率。无论输送带上的箱包在什么位置，朝向哪里，康耐视图像读码器都能定位、读取和对任意条码进行解码。更少的未读代码意味着错过航班的箱包更少，从而提高了行李处理系统的整体效率，减少了手动编码操作且提高了客户满意度。
全球的部分顶级机场使用康耐视技术以：
实现00高读取率，无论条码质量或朝向如何
使用更少的读码器覆盖更多的输送带
采集所有已处理箱包的全彩照片以目视分析未读代码的原因并改善追踪和安全性
使用平均故障间隔时间 (MTBF) 为 267,000 小时（或 30 年）的读码器

CognexAirport Baggage Handling solutions-----Improve the speed and reliability of your operations
Cognex’s Airport Baggage Handling solutions improve the speed and accuracy of luggage processing. Regardless of the position or orientation of the bag on the belt, Cognex image-based barcode readers can locate, read and decode any barcode. Fewer unread codes means fewer bags miss their flights, which increases total baggage handling system efficiency, reduces manual encode operations and improves customer satisfaction.
Some of the top airports in the world use Cognex technology to:
Achieve high read rates, regardless of barcode quality or orientation
Cover more of the belt with fewer readers
Capture a full-color photo of each processed bag to visually analyze the cause of unread codes and improve tracking and security
Perform with an average 267,000 hour (or 30 year) reader mean time between failures (MTBF) rate
联系方式/Contacts：
迈布克斯（上海）会议展览有限公司
电话/Tel：+86-21 5204 9711
传真/Fax：+86-21 5204 9737
电邮/Mail：Shanghaioffice@mackbrooks.co.uk